Machine Sentry® Wireless Condition Monitoring Sensors
Machine Sentry Fixed Sensors MSF2
Reliable fixed monitoring for critical assets, hard-to-reach equipment and route-based support.
The MSF2 is a robust vibration and temperature sensor designed to extend the reach of condition monitoring across industrial sites. With tri-axial vibration measurement, Bluetooth® connectivity, long battery life and onboard memory, it helps teams collect reliable asset data with less manual intervention.
Bluetooth ConnectivityPairs with compatible Android smartphones and handheld devices, allowing data to be collected from up to 100 m away.
BatteryUp to 5 years battery life, supporting long-term monitoring without frequent battery changes.
MagnetSupports exact placement for accurate, repeatable measurements across defined monitoring points.
ATEX / IECEx / HAZLOC OptionsAvailable for use in hazardous area applications where certified monitoring equipment is required.
MemoryLarge onboard memory stores more than 5,000 readings, helping protect data continuity between collection intervals.
Vibration & Temperature SensorThree internal accelerometers provide tri-axial vibration measurement, alongside temperature data for broader asset condition insight.
Sealed to IP67Robust sealing helps protect the sensor in demanding industrial environments.
Machine Sentry® ConnectedData integrates with the Machine Sentry® platform, giving teams clearer visibility of asset condition, trends and developing faults.
Machine Sentry Fixed Sensors MSF2The MSF2 Machine Sentry Fixed Sensors can be used on a wide range of equipment, including compressors, pumps and motors as part of a condition monitoring programme. Parameters are measured in real time so any potential issues can be detected before they become failures. If an abnormality is identified, an alert is triggered. To collect essential vibration and temperature data, the MSF-2 sensor can be placed on structures and machinery wherever they are needed. Being wireless means that the sensor can be fitted in locations that would normally be difficult to monitor with a wired device. The Machine Sentry Fixed MSF-2 sensor can be temporarily installed using an optional magnetic attachment or mounted permanently for semi-continuous or continuous monitoring of your machinery. Using Bluetooth®, measurements can be collected and viewed by pairing the sensor with a handheld Android device. Alternatively, over 100 sensors can be safely connected using Machine Sentry® Gateway, and the data is collected and uploaded directly to the Machine Sentry® database to create a unique asset reliability solution. |
MSF-2 Sensor
Wireless vibration and temperature monitoring, installed where you need it. |
Machine Sentry Fixed Sensors MSF2
The MSF2 Machine Sentry Fixed Sensors can be used on a wide range of equipment, including compressors, pumps and motors as part of a condition monitoring programme. Parameters are measured in real time so any potential issues can be detected before they become failures. If an abnormality is identified, an alert is triggered.
To collect essential vibration and temperature data, the MSF-2 sensor can be placed on structures and machinery wherever they are needed. Being wireless means that the sensor can be fitted in locations that would normally be difficult to monitor with a wired device. The Machine Sentry Fixed MSF-2 sensor can be temporarily installed using an optional magnetic attachment or mounted permanently for semi-continuous or continuous monitoring of your machinery.
Using Bluetooth®, measurements can be collected and viewed by pairing the sensor with a handheld Android device. Alternatively, over 100 sensors can be safely connected using Machine Sentry® Gateway, and the data is collected and uploaded directly to the Machine Sentry® database to create a unique asset reliability solution.
MSF-2 Wireless Sensor
Machine Sentry® Fixed MSF-2 Certifications
| Certified to | EN IEC 60079-0: 2018 and EN 60079-11: 2012 |
| II 1 GEx ia IIC T4 Ga Ta= -20°C to +60°C | |
| II 1 D Ex ia IIC T135°C Da Ta= -20°C to +60°C | |
| CML 22ATEX2395X |
| Certified to | EN IEC 60079-0: 2018 and EN 60079-11: 2012 |
| II 1 G Ex ia IIC T4 Ga Ta= -20°C to +60°C | |
| II 1 D Ex ia IIC T135°C Da Ta= -20°C to +60°C | |
| CML 22UKEX2396X |
| Standards | IEC 60079-0:2017 | IEC 60079-11:2011 |
| Type of protection | Intrinsic Safety Ex “ia” |
| Marking | Ex ia IIC T4 Ga | Ex ia IIIC T135°C Da |
| Cert | IECEx CML 22.0054X |
Machine Sentry® Fixed MSF-2 Certifications
Machine Sentry® Fixed MSF-2 Applications
MSF-2 is easy to install and use, making it extremely flexible for use in many applications across a wide range of industries. For example:
Semi-continuous condition monitoring
Temporary intensive monitoring
Critical asset monitoring
Batch or variable processes
Hard to access assets
Bad actor or critical assets
Machine Sentry® Fixed MSF-2 Applications
MSF-2 is easy to install and use, making it extremely flexible for use in many applications across a wide range of industries. For example:
Semi-continuous condition monitoring
Temporary intensive monitoring
Critical asset monitoring
Batch or variable processes
Hard to access assets
Bad actor or critical assets
Explore More Machine Sentry® Products
Machine Sentry® Fixed (MSF2)Permanently mounted wireless sensor for continuous vibration and temperature monitoring. |
Machine Sentry® Mobile (MSM2)Bluetooth® handheld device for route-based inspections and portable diagnostics. |
Machine Sentry® GatewaySecure wireless hub for transferring data to the cloud from connected sensors. |
Machine Sentry® Online (MSO)Web-based platform for remote access, analysis, and condition data management. |
Explore More Machine Sentry® Products
Machine Sentry® Fixed (MSF2)
Permanently mounted wireless sensor for continuous vibration and temperature monitoring.
Machine Sentry® Mobile (MSM2)
Bluetooth® handheld device for route-based inspections and portable diagnostics.
Machine Sentry® Gateway
Secure wireless hub for transferring data to the cloud from connected sensors.
Machine Sentry® Online (MSO)
Web-based platform for remote access, analysis, and condition data management.
Ready to get Started
Use the form below to contact our team and find out more about our services.
window.addEventListener(‘DOMContentLoaded’, function () {
if (window.hbspt) {
hbspt.forms.create({
region: “na1”,
portalId: “3317862”,
formId: “4ebf37f1-b130-40ba-8f63-942814c26d11”,
target: “#avt-contact-form”,
onFormSubmit: function ($form) {
console.log(“HubSpot form submitted — pushing to dataLayer”);
window.dataLayer = window.dataLayer || [];
window.dataLayer.push({
event: ‘hubspot_form_submitted’,
form_name: ‘AVT Contact Page’
});
}
});
} else {
console.warn(“HubSpot not available”);
}
});
Related Case Studies
Also available:
Explore all Machine Sentry® wireless sensors for vibration and temperature monitoring.
