Machine Sentry MSF2 fixed condition monitoring sensor
Machine Sentry MSF2

Fixed, focused
& field-ready.

Repeatable vibration and contact-temperature monitoring from a fixed point, helping extend reliable condition visibility across more assets.

Monitoring
Tri-axial vibration + contact temperature
Protection
IP67
Battery life
Up to 5 years under stated fixed-use/configuration
Machine Sentry MSF2 fixed condition monitoring sensor
Machine Sentry MSF2

Fixed, focused
& field-ready.

Repeatable vibration and contact-temperature monitoring from a fixed point, helping extend reliable condition visibility across more assets.

Monitoring
Tri-axial vibration + contact temperature
Protection
IP67
Battery life
Up to 5 years under stated fixed-use/configuration

Machine Sentry MSF2

Reliable fixed condition monitoring.

A fixed wireless vibration and contact-temperature sensor for repeatable condition monitoring across rotating machinery.

The MSF2 is the core fixed wireless sensor in the Machine Sentry range, combining
tri-axial vibration and contact temperature monitoring with programmable acquisition,
long battery life and straightforward integration into the wider Machine Sentry environment.

Bluetooth Connectivity

Connects via Bluetooth to compatible Android smartphones and handheld devices running the Machine Sentry app, allowing sensor data to be collected and reviewed within the Machine Sentry workflow.

Battery

Up to 5 years under stated fixed-use/configuration.
Supports long-term monitoring with less routine intervention.

Magnet

Supports accurate, repeatable placement at defined monitoring points
using compatible magnetic mounting.

Certifications

ATEX / UKEX / IECEx / HAZLOC | Certified Gas Zone 0 / Dust Zone 20. These certifications support monitoring in appropriately rated hazardous-area applications.

Machine Sentry MSF2 vibration and temperature sensor

Memory

100 MB; 1,000 reading sets at full resolution.
Onboard storage helps protect data continuity between collection intervals.

Vibration & Temperature

Tri-axial vibration + contact temperature. Combines vibration and temperature condition data from the same fixed monitoring point.

Sealed to IP67

IP67. Supports deployment in demanding industrial environments.

Machine Sentry Connected

Data connects into the Machine Sentry environment for trending,
analysis and wider condition monitoring workflows.

Machine Sentry MSF2

Reliable fixed condition monitoring.

A fixed wireless vibration and contact-temperature sensor for repeatable condition monitoring across rotating machinery.

The MSF2 is the core fixed wireless sensor in the Machine Sentry range, combining
tri-axial vibration and contact temperature monitoring with programmable acquisition,
long battery life and straightforward integration into the wider Machine Sentry environment.

Bluetooth Connectivity

Connects via Bluetooth to compatible Android smartphones and handheld devices running the Machine Sentry app, allowing sensor data to be collected and reviewed within the Machine Sentry workflow.

Battery

Up to 5 years under stated fixed-use/configuration.
Supports long-term monitoring with less routine intervention.

Magnet

Supports accurate, repeatable placement at defined monitoring points
using compatible magnetic mounting.

Certifications

ATEX / UKEX / IECEx / HAZLOC | Certified Gas Zone 0 / Dust Zone 20. These certifications support monitoring in appropriately rated hazardous-area applications.

Machine Sentry MSF2 vibration and temperature sensor

Memory

100 MB; 1,000 reading sets at full resolution.
Onboard storage helps protect data continuity between collection intervals.

Vibration & Temperature

Tri-axial vibration + contact temperature. Combines vibration and temperature condition data from the same fixed monitoring point.

Sealed to IP67

IP67. Supports deployment in demanding industrial environments.

Machine Sentry Connected

Data connects into the Machine Sentry environment for trending,
analysis and wider condition monitoring workflows.

Dual Capture Technology

Two views. One monitoring point.

MSF2 can collect two differently configured vibration measurements
from the same monitoring point in a single acquisition, combining
routine monitoring with a second capture focused on an area of interest.

Profile 01

Standard measurement

A routine measurement profile can be configured for regular condition
monitoring, for example an ISO 20816-style setup.

Single acquisition
One point.
Two profiles.

Profile 02

Focused capture

A second profile can target a specific diagnostic need, such as
higher resolution or higher-frequency detail.

Why it matters: Dual Capture Technology gives reliability teams more targeted information from one fixed monitoring point without adding another sensor or turning routine monitoring into a separate measurement visit.

Dual Capture Technology

Two views. One monitoring point.

MSF2 can collect two differently configured vibration measurements
from the same monitoring point in a single acquisition, combining
routine monitoring with a second capture focused on an area of interest.

Profile 01

Standard measurement

A routine measurement profile can be configured for regular condition
monitoring, for example an ISO 20816-style setup.

Single acquisition
One point.
Two profiles.

Profile 02

Focused capture

A second profile can target a specific diagnostic need, such as
higher resolution or higher-frequency detail.

Why it matters: Dual Capture Technology gives reliability teams more targeted information from one fixed monitoring point without adding another sensor or turning routine monitoring into a separate measurement visit.

Machine Sentry App

Condition data where the work happens.

The Machine Sentry app is the field interface for local condition monitoring activity, connecting compatible hardware, route-based collection, asset navigation, review and field actions to the wider Machine Sentry history.

Android smartphone showing the Machine Sentry App screen

Collect and review in the field

Connect to compatible Machine Sentry hardware, collect condition data and review vibration spectra, time waveform and related asset information at the machine.

Navigate assets faster

Routes, asset navigation and QR, barcode or NFC-supported workflows
help technicians get to the right monitoring point and keep activity
tied to the correct asset record.

Manage fixed sensors

Configure and collect from compatible fixed Machine Sentry sensors,
including the MSF2 family, as part of the same field workflow.

Turn findings into action

Photos, actions and field observations can be recorded alongside condition data and synchronised into the wider Machine Sentry asset history.

Machine Sentry App

Condition data where the work happens.

The Machine Sentry app is the field interface for local condition monitoring activity, connecting compatible hardware, route-based collection, asset navigation, review and field actions to the wider Machine Sentry history.

Android smartphone showing the Machine Sentry App screen

Collect and review in the field

Connect to compatible Machine Sentry hardware, collect condition data and review vibration spectra, time waveform and related asset information at the machine.

Navigate assets faster

Routes, asset navigation and QR, barcode or NFC-supported workflows
help technicians get to the right monitoring point and keep activity
tied to the correct asset record.

Manage fixed sensors

Configure and collect from compatible fixed Machine Sentry sensors,
including the MSF2 family, as part of the same field workflow.

Turn findings into action

Photos, actions and field observations can be recorded alongside condition data and synchronised into the wider Machine Sentry asset history.

Connected monitoring

Connected from asset to action.

MSF2 can be collected locally through the Machine Sentry App on a compatible Android device or connected through a compatible Gateway for unattended transfer across wider fixed-sensor deployments. Both routes keep the monitoring point connected to the same Machine Sentry condition monitoring environment.

01 / Asset

Machine condition

Vibration and contact temperature are captured from a defined monitoring point.

02 / Sensor

MSF2

The fixed wireless sensor stores and transmits condition data from the asset.

03 / Connect

App or Gateway

Collect locally through the Machine Sentry app on a compatible Android device, or automate transfer through a Gateway.

04 / Platform

Machine Sentry

Condition data becomes available in Machine Sentry for trending, analysis, alarms, reporting and the wider asset history.

05 / Action

Remote diagnostics

Condition data can be reviewed and interpreted remotely by an in-house reliability team or the Remote Diagnostic Centre, helping investigate change and define the next action.

Connected monitoring

Connected from asset to action.

MSF2 can be collected locally through the Machine Sentry App on a compatible Android device or connected through a compatible Gateway for unattended transfer across wider fixed-sensor deployments. Both routes keep the monitoring point connected to the same Machine Sentry condition monitoring environment.

01 / Asset

Machine condition

Vibration and contact temperature are captured from a defined monitoring point.

02 / Sensor

MSF2

The fixed wireless sensor stores and transmits condition data from the asset.

03 / Connect

App or Gateway

Collect locally through the Machine Sentry app on a compatible Android device, or automate transfer through a Gateway.

04 / Platform

Machine Sentry

Condition data becomes available in Machine Sentry for trending, analysis, alarms, reporting and the wider asset history.

05 / Action

Remote diagnostics

Condition data can be reviewed and interpreted remotely by an in-house reliability team or the Remote Diagnostic Centre, helping investigate change and define the next action.

Machinery & applications

Fixed monitoring where repeatability matters.

MSF2 is designed for broad fixed-monitoring use across rotating machinery, especially where access, consistency and efficient repeat collection matter.

Best-fit use

A permanent monitoring point for everyday rotating assets.

MSF2 is a strong fit where teams want dependable, repeatable vibration and temperature measurements from the same location over time without the infrastructure of a continuous wired system.

Measures
Tri-axial vibration + contact temperature
Approach
Fixed wireless monitoring
Use
Routine condition monitoring
01

Motors, pumps and fans

Broad rotating-machine use where a permanent point improves consistency between measurements.

02

Hard-to-reach assets

Useful where repeated manual access is awkward, elevated or inefficient.

03

Intermittently running machinery

Running detection and programmable acquisition support monitoring where equipment does not operate continuously.

04

Semi-critical asset populations

Suits wider fixed-monitoring programmes where permanent sensing adds visibility without full continuous-wired infrastructure.

Machinery & applications

Fixed monitoring where repeatability matters.

MSF2 is designed for broad fixed-monitoring use across rotating machinery, especially where access, consistency and efficient repeat collection matter.

Best-fit use

A permanent monitoring point for everyday rotating assets.

MSF2 is a strong fit where teams want dependable, repeatable vibration and temperature measurements from the same location over time without the infrastructure of a continuous wired system.

Measures
Tri-axial vibration + contact temperature
Approach
Fixed wireless monitoring
Use
Routine condition monitoring
01

Motors, pumps and fans

Broad rotating-machine use where a permanent point improves consistency between measurements.

02

Hard-to-reach assets

Useful where repeated manual access is awkward, elevated
or inefficient.

03

Intermittently running machinery

Running detection and programmable acquisition support monitoring where equipment does not operate continuously.

04

Semi-critical asset populations

Suits wider fixed-monitoring programmes where permanent sensing adds visibility without full continuous-wired infrastructure.

Technical specifications

Technical Specification

Core MSF2 technical data, grouped for quick engineering reference.

Measurement
Internal sensing
Tri-axial (X, Y and Z axes) accelerometer + contact temperature
Frequency range
1 Hz to 8.5 kHz
Amplitude range
Switchable up to ±64 g
Temperature measurement
-40 to +115 °C
A2D resolution
16 bit
Maximum FFT lines
6,400 lines
Connectivity
Wireless communication
Bluetooth LE 5.2
Wireless band
2.4 GHz
Wireless range
Up to 100 m under ideal conditions
Mobile platform
Recommended Android 11+
Power & storage
Battery
Lithium Thionyl Chloride 3.6 V 8500 mAh
Battery life
Up to 5 years under stated fixed-use/configuration
Storage
100 MB; 1,000 reading sets at full resolution
Physical
Dimensions
42 mm diameter 80 mm height
Weight
180 g
Case material
316 Stainless / Polycarbonate
Ingress protection
IP67
Operating temperature
-20 to +60 °C

Technical specifications

Technical Specification

Core MSF2 technical data, grouped for quick engineering reference.

Measurement
Internal sensing
Tri-axial (X, Y and Z axes) accelerometer + contact temperature
Frequency range
1 Hz to 8.5 kHz
Amplitude range
Switchable up to ±64 g
Temperature measurement
-40 to +115 °C
A2D resolution
16 bit
Maximum FFT lines
6,400 lines
Connectivity
Wireless communication
Bluetooth LE 5.2
Wireless band
2.4 GHz
Wireless range
Up to 100 m under ideal conditions
Mobile platform
Recommended Android 11+
Power & storage
Battery
Lithium Thionyl Chloride 3.6 V 8500 mAh
Battery life
Up to 5 years under stated fixed-use/configuration
Storage
100 MB; 1,000 reading sets at full resolution
Physical
Dimensions
42 mm diameter 80 mm height
Weight
180 g
Case material
316 Stainless / Polycarbonate
Ingress protection
IP67
Operating temperature
-20 to +60 °C

Certifications

Certified for demanding environments.

MSF2 has product-specific hazardous-area approvals for appropriately classified gas and dust environments.

ATEX
Hazardous-area certification
CML 22ATEX2395X. II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T135°C Da. EN IEC 60079-0:2018; EN 60079-11:2012. Ambient: -20°C ≤ Ta ≤ +60°C.
UKEX
UK hazardous-area certification
CML 22UKEX2396X. II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
IECEx
International certification
IECEx CML 22.0054X. Ex ia IIC T4 Ga; Ex ia IIIC T135°C Da. IEC 60079-0:2017 Ed. 7; IEC 60079-11:2011 Ed. 6. Ambient: -20°C ≤ Ta ≤ +60°C.
HAZLOC
North American hazardous locations
MET E115629. Class I and II Division 1 Groups A–D T4; Class II Division 1 Groups E–G T135°C. Class I Zone 0 AEx ia IIC T4 Ga; Class II Zone 20 AEx ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
Gas
Zone 0
Dust
Zone 20

Certifications

Certified for demanding environments.

MSF2 has product-specific hazardous-area approvals for appropriately classified gas and dust environments.

ATEX
Hazardous-area certification
CML 22ATEX2395X. II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T135°C Da. EN IEC 60079-0:2018; EN 60079-11:2012. Ambient: -20°C ≤ Ta ≤ +60°C.
UKEX
UK hazardous-area certification
CML 22UKEX2396X. II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
IECEx
International certification
IECEx CML 22.0054X. Ex ia IIC T4 Ga; Ex ia IIIC T135°C Da. IEC 60079-0:2017 Ed. 7; IEC 60079-11:2011 Ed. 6. Ambient: -20°C ≤ Ta ≤ +60°C.
HAZLOC
North American hazardous locations
MET E115629. Class I and II Division 1 Groups A–D T4; Class II Division 1 Groups E–G T135°C. Class I Zone 0 AEx ia IIC T4 Ga; Class II Zone 20 AEx ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
Gas
Zone 0
Dust
Zone 20

AVT Remote Diagnostics Centre

The technology to monitor.The people to understand.

Machine Sentry brings asset condition information together. AVT reliability specialists can help turn that evidence into practical maintenance decisions.

Connected expertiseMachine Sentry + AVT
01

Monitor

Connected asset data, trends and diagnostic evidence provide the starting point.

02

Understand

AVT specialists can review condition evidence and asset history alongside your own team.

03

Act

Engineering interpretation helps inform maintenance priorities and the next investigation.

Your team, AVT, or both. Expert support can be added to suit the programme.

AVT Remote Diagnostics Centre

The technology to monitor.The people to understand.

Machine Sentry brings asset condition information together. AVT reliability specialists can help turn that evidence into practical maintenance decisions.

Connected expertiseMachine Sentry + AVT
01

Monitor

Connected asset data, trends and diagnostic evidence provide the starting point.

02

Understand

AVT specialists can review condition evidence and asset history alongside your own team.

03

Act

Engineering interpretation helps inform maintenance priorities and the next investigation.

Your team, AVT, or both. Expert support can be added to suit the programme.

Explore the range

MONITOR MORE

Choose, combine and connect the monitoring that fits your assets.

Machine Sentry MSF2 sensor

Fixed monitoring

MSF2

For broad fixed wireless vibration and temperature monitoring where a permanent point improves repeatability and regular asset visibility.

View MSF2

Machine Sentry MSF2-L sensor

Low-speed monitoring

MSF2-L

For lower-speed machinery, low-level vibration and structural monitoring where greater sensitivity to subtle vibration behaviour is required.

View MSF2-L

Machine Sentry MSF-Pro sensor

Advanced fixed input

MSF-Pro

For fixed wireless condition monitoring that also needs a compatible external accelerometer or speed-reference input.

View MSF-Pro

Machine Sentry MSM2 sensor

Portable diagnostics

MSM2

For portable route-based vibration monitoring, troubleshooting and hands-on diagnostic work where the measurement point needs to move with the engineer.

View MSM2

Machine Sentry

See Machine Sentry in action.

See how the right mix of sensors, software and monitoring methods can work together across your assets, then build the Machine Sentry system around the application.

Explore the range

MONITOR MORE

Choose, combine and connect the monitoring that fits your assets.

Machine Sentry MSF2 sensor

Fixed monitoring

MSF2

For broad fixed wireless vibration and temperature monitoring where a permanent point improves repeatability and regular asset visibility.

View MSF2

Machine Sentry MSF2-L sensor

Low-speed monitoring

MSF2-L

For lower-speed machinery, low-level vibration and structural monitoring where greater sensitivity to subtle vibration behaviour is required.

View MSF2-L

Machine Sentry MSF-Pro sensor

Advanced fixed input

MSF-Pro

For fixed wireless condition monitoring that also needs a compatible external accelerometer or speed-reference input.

View MSF-Pro

Machine Sentry MSM2 sensor

Portable diagnostics

MSM2

For portable route-based vibration monitoring, troubleshooting and hands-on diagnostic work where the measurement point needs to move with the engineer.

View MSM2

Machine Sentry

See Machine Sentry in action.

See how the right mix of sensors, software and monitoring methods can work together across your assets, then build the Machine Sentry system around the application.

Proven in practice

Reliability in action.

Explore how condition information and reliability expertise support real engineering decisions.

LOG INTO MACHINE SENTRY