Machine Sentry MSM2 portable vibration monitoring sensor
Machine Sentry MSM2

Reliable. Robust. Ready when you are.

Portable route-based vibration monitoring, non-contact IR temperature measurement and an external powered input for deeper diagnostic work.

Monitoring
Tri-axial vibration + non-contact IR temperature
Protection
IP67
Battery life
Up to 6 months under stated mobile-use/configuration
Machine Sentry MSM2 portable vibration monitoring sensor
Machine Sentry MSM2

Reliable. Robust.
Ready when you are.

Portable route-based vibration monitoring, non-contact IR temperature measurement and an external powered input for deeper diagnostic work.

Monitoring
Tri-axial vibration + non-contact IR temperature
Protection
IP67
Battery life
Up to 6 months under stated mobile-use/configuration

Machine Sentry MSM2

Portable condition monitoring with deeper diagnostic capability.

A portable wireless sensor for route-based condition monitoring and hands-on vibration troubleshooting.

MSM2 combines tri-axial vibration, non-contact infrared temperature measurement and a powered external input, giving engineers a practical route collector and a flexible tool for advanced investigations.

Portable route-based monitoring

Designed for condition monitoring routes and hands-on troubleshooting across multiple assets.

Tri-axial vibration

Three internal measurement axes capture vibration data during route-based collection.

Non-contact IR temperature

Integrated infrared temperature sensing adds another machine-condition indicator during collection.

External sensor input

0–18 V or ICP powered input enables compatible external-sensor measurements.

Machine Sentry MSM2 portable vibration monitoring sensor

Phase capability

Connect an external accelerometer for cross-phase investigation or an optical tachometer for shaft-referenced absolute phase.

Higher-frequency input

External FMax up to 25,000 Hz and sampling up to 64,000 samples/s support deeper diagnostic investigation.

Machine Sentry App connected

Connect wirelessly to a compatible Android device running the Machine Sentry App for collection, review and asset-linked workflows.

Hazardous-area certified

ATEX / UKEX / IECEx / HAZLOC. Certified for Gas Zone 0 and Dust Zone 20 applications, subject to the approved installation requirements.

Machine Sentry MSM2

Portable condition monitoring with deeper diagnostic capability.

A portable wireless sensor for route-based condition monitoring and hands-on vibration troubleshooting.

MSM2 combines tri-axial vibration, non-contact infrared temperature measurement and a powered external input, giving engineers a practical route collector and a flexible tool for advanced investigations.

Portable route-based monitoring

Designed for condition monitoring routes and hands-on troubleshooting across multiple assets.

Tri-axial vibration

Three internal measurement axes capture vibration data during route-based collection.

Non-contact IR temperature

Integrated infrared temperature sensing adds another machine-condition indicator during collection.

External sensor input

0–18 V or ICP powered input enables compatible external-sensor measurements.

Machine Sentry MSM2 portable vibration monitoring sensor

Phase capability

Connect an external accelerometer for cross-phase investigation or an optical tachometer for shaft-referenced absolute phase.

Higher-frequency external input

External FMax up to 25,000 Hz and sampling up to 64,000 samples/s support deeper diagnostic investigation.

Machine Sentry App connected

Connect wirelessly to a compatible Android device running the Machine Sentry App for collection, review and asset-linked workflows.

Hazardous-area certified

ATEX / UKEX / IECEx / HAZLOC. Certified for Gas Zone 0 and Dust Zone 20 applications, subject to the approved installation requirements.

Portable diagnostic capability

From routine routes to deeper investigation.

MSM2 combines its internal sensing with a compatible powered external input, so one portable device can support routine collection and more focused vibration analysis.

Measurement 01

Route-based collection

Tri-axial vibration and non-contact IR temperature measurements are collected at defined points as the engineer moves between assets.

Portable MSM2
One device.
More diagnostic options.

Measurement 02

External input and phase

Connect a compatible external accelerometer or optical tachometer for higher-frequency investigation and supported phase-related workflows.

Technical detail: The external input supports FMax up to 25,000 Hz and sampling up to 64,000 samples/s, dependent on the selected mode and configuration.

Portable diagnostic capability

From routine routes to deeper investigation.

MSM2 combines its internal sensing with a compatible powered external input, so one portable device can support routine collection and more focused vibration analysis.

Measurement 01

Route-based collection

Tri-axial vibration and non-contact IR temperature measurements are collected at defined points as the engineer moves between assets.

Portable MSM2
One device.
More diagnostic options.

Measurement 02

External input and phase

Connect a compatible external accelerometer or optical tachometer for higher-frequency investigation and supported phase-related workflows.

Technical detail: The external input supports FMax up to 25,000 Hz and sampling up to 64,000 samples/s, dependent on the selected mode and configuration.

Machine Sentry App

Collect and investigate in the field.

The Machine Sentry App on a compatible Android device connects MSM2 measurements to the right assets, enabling field collection, review and linked diagnostic records.

Compatible Android device showing the Machine Sentry App

Collect on planned routes

Use MSM2 at defined measurement points across multiple machines and keep readings associated with their asset records.

Review vibration on site

Review spectra and time waveforms when data is available in the App, with supporting asset information at the machine.

Support focused investigation

Use compatible external measurements for specialist troubleshooting without abandoning the portable collection workflow.

Connect findings to the platform

Synchronise condition data, notes and actions into the wider Machine Sentry asset history for analysis and follow-up.

Machine Sentry App

Collect and investigate in the field.

The Machine Sentry App on a compatible Android device connects MSM2 measurements to the right assets, enabling field collection, review and linked diagnostic records.

Compatible Android device showing the Machine Sentry App

Collect on planned routes

Use MSM2 at defined measurement points across multiple machines and keep readings associated with their asset records.

Review vibration on site

Review spectra and time waveforms when data is available in the App, with supporting asset information at the machine.

Support focused investigation

Use compatible external measurements for specialist troubleshooting without abandoning the portable collection workflow.

Connect findings to the platform

Synchronise condition data, notes and actions into the wider Machine Sentry asset history for analysis and follow-up.

Connected route monitoring

From route to reliability action.

MSM2 brings portable condition monitoring data from the machine into Machine Sentry through its field collection workflow.

01 / Asset

Measurement point

The engineer identifies the asset and the required route or diagnostic measurement.

02 / Sensor

MSM2

Portable tri-axial vibration and non-contact IR temperature data is captured at the machine.

03 / Connect

Machine Sentry App

MSM2 communicates with a compatible Android device running the Machine Sentry App.

04 / Platform

Machine Sentry

Collected data becomes part of the asset history for trends, analysis, alarms and reporting.

05 / Action

Diagnostic review

Reliability teams interpret findings and decide whether investigation or corrective action is needed.

Connected route monitoring

From route to reliability action.

MSM2 brings portable condition monitoring data from the machine into Machine Sentry through its field collection workflow.

01 / Asset

Measurement point

The engineer identifies the asset and the required route or diagnostic measurement.

02 / Sensor

MSM2

Portable tri-axial vibration and non-contact IR temperature data is captured at the machine.

03 / Connect

Machine Sentry App

MSM2 communicates with a compatible Android device running the Machine Sentry App.

04 / Platform

Machine Sentry

Collected data becomes part of the asset history for trends, analysis, alarms and reporting.

05 / Action

Diagnostic review

Reliability teams interpret findings and decide whether investigation or corrective action is needed.

Machinery & applications

Portable monitoring for the work in front of you.

MSM2 is built for planned route collection and hands-on troubleshooting, with additional diagnostic options when deeper investigation is required.

Best-fit use

Take measurement capability to the asset.

With MSM2, the engineer moves between monitoring points and collects data at each machine. The same portable approach supports routine route work and selected external-sensor investigations.

MeasuresTri-axial vibration + non-contact IR temperature
ApproachPortable route collection
OptionsPowered external input
01

Routine collection routes

Collect vibration and IR temperature at defined points across motors, pumps, fans, gearboxes and other rotating equipment.

02

Ad-hoc troubleshooting

Bring the portable sensor to machines needing more detailed investigation outside routine collection.

03

Guarded or awkward access points

Use compatible measurement configurations where conventional point access is more difficult.

04

Phase and external-sensor investigation

Use a compatible accelerometer or optical tachometer when measurement requirements go beyond the internal sensor.

Machinery & applications

Portable monitoring for the work in front of you.

MSM2 is built for planned route collection and hands-on troubleshooting, with additional diagnostic options when deeper investigation is required.

Best-fit use

Take measurement capability to the asset.

With MSM2, the engineer moves between monitoring points and collects data at each machine. The same portable approach supports routine route work and selected external-sensor investigations.

MeasuresTri-axial vibration + non-contact IR temperature
ApproachPortable route collection
OptionsPowered external input
01

Routine collection routes

Collect vibration and IR temperature at defined points across motors, pumps, fans, gearboxes and other rotating equipment.

02

Ad-hoc troubleshooting

Bring the portable sensor to machines needing more detailed investigation outside routine collection.

03

Guarded or awkward access points

Use compatible measurement configurations where conventional point access is more difficult.

04

Phase and external-sensor investigation

Use a compatible accelerometer or optical tachometer when measurement requirements go beyond the internal sensor.

Technical specifications

Technical Specification

Controlled MSM2 technical details for engineering reference. Performance depends on measurement configuration and selected accessories.

Measurement
Internal vibration
Tri-axial, 3 internal axes
Additional channel
1 external 0–18 V / ICP powered input
Internal frequency
Maximum 6 kHz; configurable FMax 200–10,000 Hz
External frequency
Configurable FMax 200–25,000 Hz
Sampling
Internal 512–25,600 samples/s; external 512–64,000 samples/s
Non-contact IR temperature
-70 to +380 °C; 12° field of view
Connectivity
Wireless communication
Bluetooth LE 5.2; 2.4 GHz
Mobile platform
Recommended Android 11+ running Machine Sentry App
Power & storage
Battery
Lithium 3.6 V C Cell; 8500 mAh
Mobile-use battery life
Up to 6 months under stated use/configuration
Onboard storage
100 MB; 1,000 reading sets at full resolution
Environment
Protection
IP67
Operating temperature
-20 to +60 °C
Storage temperature
10 to 25 °C
Case material
316 stainless steel / polycarbonate

Technical specifications

Technical Specification

Controlled MSM2 technical details for engineering reference. Performance depends on measurement configuration and selected accessories.

Measurement
Internal vibration
Tri-axial, 3 internal axes
Additional channel
1 external 0–18 V / ICP powered input
Internal frequency
Maximum 6 kHz; configurable FMax 200–10,000 Hz
External frequency
Configurable FMax 200–25,000 Hz
Sampling
Internal 512–25,600 samples/s; external 512–64,000 samples/s
Non-contact IR temperature
-70 to +380 °C; 12° field of view
Connectivity
Wireless communication
Bluetooth LE 5.2; 2.4 GHz
Mobile platform
Recommended Android 11+ running Machine Sentry App
Power & storage
Battery
Lithium 3.6 V C Cell; 8500 mAh
Mobile-use battery life
Up to 6 months under stated use/configuration
Onboard storage
100 MB; 1,000 reading sets at full resolution
Environment
Protection
IP67
Operating temperature
-20 to +60 °C
Storage temperature
10 to 25 °C
Case material
316 stainless steel / polycarbonate

Certifications

Certified for demanding environments.

MSM2 has product-specific hazardous-area approvals for appropriately classified gas and dust environments. External accessories have their own certification and environmental ratings.

ATEX
Hazardous-area certification
CML 23ATEX2216X. II 1G Ex ia IIB T4 Ga; II 1D Ex ia IIIB T135°C Da. EN IEC 60079-0:2018; EN 60079-11:2012. Ambient: -20°C ≤ Ta ≤ +60°C.
UKEX
UK hazardous-area certification
CML 23UKEX2217X. II 1G Ex ia IIB T4 Ga; II 1D Ex ia IIIB T135°C Da. EN IEC 60079-0:2018; EN 60079-11:2012. Ambient: -20°C ≤ Ta ≤ +60°C.
IECEx
International certification
IECEx CML 23.0078X. Ex ia IIB T4 Ga; Ex ia IIIB T135°C Da. IEC 60079-0:2017 Ed. 7; IEC 60079-11:2011 Ed. 6. Ambient: -20°C ≤ Ta ≤ +60°C.
HAZLOC
North American hazardous locations
MET E115629. Class I and II Division 1 Groups C–D T4; Class II Division 1 Groups F–G T135°C. Class I Zone 0 AEx ia IIB T4 Ga; Class II Zone 20 AEx ia IIIB T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
Gas
Zone 0
Dust
Zone 20

Certifications

Certified for demanding environments.

MSM2 has product-specific hazardous-area approvals for appropriately classified gas and dust environments. External accessories have their own certification and environmental ratings.

ATEX
Hazardous-area certification
CML 23ATEX2216X. II 1G Ex ia IIB T4 Ga; II 1D Ex ia IIIB T135°C Da. EN IEC 60079-0:2018; EN 60079-11:2012. Ambient: -20°C ≤ Ta ≤ +60°C.
UKEX
UK hazardous-area certification
CML 23UKEX2217X. II 1G Ex ia IIB T4 Ga; II 1D Ex ia IIIB T135°C Da. EN IEC 60079-0:2018; EN 60079-11:2012. Ambient: -20°C ≤ Ta ≤ +60°C.
IECEx
International certification
IECEx CML 23.0078X. Ex ia IIB T4 Ga; Ex ia IIIB T135°C Da. IEC 60079-0:2017 Ed. 7; IEC 60079-11:2011 Ed. 6. Ambient: -20°C ≤ Ta ≤ +60°C.
HAZLOC
North American hazardous locations
MET E115629. Class I and II Division 1 Groups C–D T4; Class II Division 1 Groups F–G T135°C. Class I Zone 0 AEx ia IIB T4 Ga; Class II Zone 20 AEx ia IIIB T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
Gas
Zone 0
Dust
Zone 20

AVT Remote Diagnostics Centre

The technology to monitor.The people to understand.

Machine Sentry brings asset condition information together. AVT reliability specialists can help turn that evidence into practical maintenance decisions.

Connected expertiseMachine Sentry + AVT
01

Monitor

Connected asset data, trends and diagnostic evidence provide the starting point.

02

Understand

AVT specialists can review condition evidence and asset history alongside your own team.

03

Act

Engineering interpretation helps inform maintenance priorities and the next investigation.

Your team, AVT, or both. Expert support can be added to suit the programme.

AVT Remote Diagnostics Centre

The technology to monitor.The people to understand.

Machine Sentry brings asset condition information together. AVT reliability specialists can help turn that evidence into practical maintenance decisions.

Connected expertiseMachine Sentry + AVT
01

Monitor

Connected asset data, trends and diagnostic evidence provide the starting point.

02

Understand

AVT specialists can review condition evidence and asset history alongside your own team.

03

Act

Engineering interpretation helps inform maintenance priorities and the next investigation.

Your team, AVT, or both. Expert support can be added to suit the programme.

Explore the range

MONITOR MORE

Choose, combine and connect the monitoring that fits your assets.

Machine Sentry MSF2 sensor

Fixed monitoring

MSF2

For broad fixed wireless vibration and temperature monitoring where a permanent point improves repeatability and regular asset visibility.

View MSF2

Machine Sentry MSF2-L sensor

Low-speed monitoring

MSF2-L

For lower-speed machinery, low-level vibration and structural monitoring where greater sensitivity to subtle vibration behaviour is required.

View MSF2-L

Machine Sentry MSF-Pro sensor

Advanced fixed input

MSF-Pro

For fixed wireless condition monitoring that also needs a compatible external accelerometer or speed-reference input.

View MSF-Pro

Machine Sentry MSM2 sensor

Portable diagnostics

MSM2

For portable route-based vibration monitoring, troubleshooting and hands-on diagnostic work where the measurement point needs to move with the engineer.

View MSM2

Machine Sentry

See Machine Sentry in action.

See how the right mix of sensors, software and monitoring methods can work together across your assets, then build the Machine Sentry system around the application.

Explore the range

MONITOR MORE

Choose, combine and connect the monitoring that fits your assets.

Machine Sentry MSF2 sensor

Fixed monitoring

MSF2

For broad fixed wireless vibration and temperature monitoring where a permanent point improves repeatability and regular asset visibility.

View MSF2

Machine Sentry MSF2-L sensor

Low-speed monitoring

MSF2-L

For lower-speed machinery, low-level vibration and structural monitoring where greater sensitivity to subtle vibration behaviour is required.

View MSF2-L

Machine Sentry MSF-Pro sensor

Advanced fixed input

MSF-Pro

For fixed wireless condition monitoring that also needs a compatible external accelerometer or speed-reference input.

View MSF-Pro

Machine Sentry MSM2 sensor

Portable diagnostics

MSM2

For portable route-based vibration monitoring, troubleshooting and hands-on diagnostic work where the measurement point needs to move with the engineer.

View MSM2

Machine Sentry

See Machine Sentry in action.

See how the right mix of sensors, software and monitoring methods can work together across your assets, then build the Machine Sentry system around the application.

Proven in practice

Reliability in action.

Explore how condition information and reliability expertise support real engineering decisions.

LOG INTO MACHINE SENTRY